مقایسه مانیتور های CME pump

شروع موضوع توسط Ali Sadighi ‏5/2/11 در انجمن آرشیو مطالب قدیمی

تاپیک مقایسه مانیتور های CME pump تالار آرشیو مطالب قدیمی در persian-music.org.

  1. Ali Sadighi

    Ali Sadighi عضو سایت

    تاریخ عضویت:
    ‏1/3/10
    ارسال ها:
    49
    جنسیت:
    مرد
    شغل :
    دفتریار اسناد رسمی
    محل سکونت:
    آمل
    امتیازات:
    +18 / 0 / -0
    نرم افزار:
    cubase
    سلام خدمت همه دوستان و اساتید گرامی.
    میخواستم بدونم کسی تا حالا صدای مانیتورهای مدل pump 6A یا pump 8A رو شنیده و میتونه یه مقایسه ای با مانیتورهای دیگه داشته باشه؟
    قیمتاش که ظاهرا مناسبه !
    اینم مشخصات فنیش: مشاهده پیوست 2590

    Biamplified direct field monitor speaker​

    - Pump axes structure design,thick face place of 25mm and big solid cabinet for powerful low frequency response
    - High S/N ratio bi-amplifier with fourth order electronic crossover circuit for smooth frequency response
    - Mineral-filled polypropylene cone with high temperature voice coil and dampened rubber surround to reach SPL at 91 dB
    - High-efficient ferrofluid-cooled natural soft dome with dedicated filter for clean sound
    - Fully magnetically shield, front volume dial, delay protection circuit when powering-on, perfectly suitable for computer based digital recording studio

    Specification

    PUMP 6aLow Frequency Drive
    6" magnetically shield mineral-filled polypropylene cone with high temperature voice coil and damped rubber surround
    High Frequency Drive:
    magnetically shield ferrofluid-cooled natural soft dome
    Frequency response: 45Hz-20kHz
    Crossover: 2.5K
    (SPL: 90dB (1m&1W
    (Amplifier power: 80w (LF)+40W (HF
    Dimension: 237mm×260mm×340mm
    - Weight:10.5KG/PC

    PUMP 8a
    Low Frequency Drive:
    - 8" magnetically shield mineral-filled polypropylene cone with high temperature voice coil and damped rubber surround
    High frequency Drive:
    - 1"magnetically shiekd ferrofluid-cooled natural soft dome
    - Frequency response: 40Hz-20KHz
    - Crossover: 2.5K
    - SPL: 91dB (1m&1W)
    - Amplifier power: 100W (LF)+50W(HF)
    - Dimension: 300mm×330mm×430mm
    - Weight: 16KG/PC


    Common Specifications
    Circuit
    - Frequency response: 30Hz~25000Hz, ≤3dB
    - THD: ≤0.5%
    - Signal to noise ratio: ≥80dB
    Other:
    - Input Connectors: XLR and 1/4" connector, accept balanced or unbalanced source
    - Input sensitivity: 0.775V input produces full of output level at maximum
    - Indicator: Power ON LED indicator
    - Cabinet: MDF, Internally insulated
    - Power requirements: 220/240V~50/60Hz, or 100/120V~50/60Hz

     
بارگذاری...